ELMED ESU 100 E M/M, Special Electrosurgical Unit

SPECIAL ELECTROSURGICAL UNITS FOR LAPAROSCOPY AND OTHER MININIAL INVASIVE PROCEDURES

Endoscopic surgery has established itself as a standard procedure throughout the world. Since the technique significantly differs from open surgery, special electrosurgical generators are recommended.

ELMED has been in the forefront of developing endoscopic instrumentation. Based on over 20 years of experience and collaborating with prominent surgeons we introduced a line of special electrosurgical generators for laparoscopy and minimal invasive procedures. These units meet and exceed all recommendations of the Committee on Standards of the American Association of Gynecological Laparoscopists and other recognized standards.

ESU 100 E M/M

THE ELMED LINE OF ESU 100 GENERATORS FEATURE:

Three RF-solid state circuits. One for unipolar cutting and coagulation in the MICRO or MACRO modes, one for bipolar coagulation, and one for BI-POL CUTTING ESU 100 E M/M-B only).
Accepts all laparoscopic or pelviscopic electrosurgical instruments.
Single pedal footswitch operated, with low voltage switching circuit.
Patient safety circuit. Automatic, low voltage sentry, alarms and deactivates the unipolar output in case of a defect in the connections for the patient plate circuit. Optionally, our Return Electrode Monitor System is available, which also will alarm and deactivate the unipolar output in case of poor patient plate contact.
Change-over switch for unipolar or bipolar operation, defeats the patient plate alarm in the bipolar mode.
Visual and audible RF-indicators.
L.E.D. Bar-graph meter for unipolar wattage.
Low voltage bipolar generator provides reliable coagulation with all available bipolar forceps for laparoscopy, pelviscopy and microsurgery.
Musical coagulation monitor for the bipolar mode provides both audible and visual indication of the degree of tissue coagulation, particularly for bipolar tubal sterilization (Not available on the 100 L).
SMART-O-MATIC, automatic compensation circuit provides the desired output for all electrodes or tissue conditions. The automatic range control, which is divided into ten steps, requires no readjustment within the set range. The SMART-O-MATIC operates in both the unipolar and bipolar modes.
Output intensity may be precisely regulated within the full range of the dial setting. However, investigations have demonstrated 20 W at 100 Ohms achieves optimal results, therefore, we have incorporated a preset selection and 20 W range preselect switch (Not available on 100 L).
All of these ELMED 100 series Electrosurgical Units are designed as table top units. A specially designed cart (List No. 52-5067) is available for these described units and other endoscopic equipment.

SPECIFICATIONS:

These units incorporate State-Of-The-Art printed and solid state circuits.

Operating Frequency: 500 KHz

RF Waveform: Non-modulated RF-current

Power Supply: 117 Volts, 60 Hz (Other power requirements on request)

Dimensions: 5 1/2" H X 12 1/2" W X 11 1/2" D (14 cm H x 32 cm W x 29 cm D)

Weight: 13 Ibs (5.9 kg)

CERTIFICATES AND APPROVALS: Units meet the latest electrical safety standards of OSHA, NFPA, CSA, complies with UL 544, VDE, FTZ. Meets AAGL standards recommendations to the FDA on electrosurgical equipment in laparoscopy.

RECOMMENDED ACCESSORY PACKAGE: List No. 52-5534 Accessory Package for 100 series units consisting of: List Nos. 52005-11 Water Sealed Footswitch, 52005-08 Patient Plate Return Cable, 52005-31 Unipolar RF-connection cable, samples of disposable patient plates.

Select additional accessories for unipolar and bipolar applications from the ELMED catalogs for laparoscopic and pelviscopic instruments